Continue Reading →
2017/2018 Trionic Product News
For 2017 Trionic has made a tremendous achievement in developing brand new Veloped models and new versions of the Walker 12er & 14er.
New Veloped Frame
Trionic has developed a completely new Veloped frame. The frame is welded from unique hydroformed 6061 alloy tubing, which guarantee you years and years of hard use.
Hydroforming is achieved by entering the pre-shaped tube tube into a mold, followed by putting the inner of the tube under high pressure through the use of a mixture of water and oil. Hydroforming allows the cross-section of the tube to change along the length of the tube, and an optimal strength-to-weight ratio is achieved.
The new Veloped frame has a 2-layer silver metallic powder coating and a cool sticker kit that result in a stunning and bicycle-like look.
New Tires - Trionic Primera and Trionic X-Country
In close cooperation with a high-quality and well-reputed bicycle tire manufacturer, Trionic has now developed tires specifically designed for the Velopeds and Walkers.
Trionic Primera Tire
The Walker 12er and 14er are now equipped with the new Trionic Primera tire. The Primera tire has a carcass made from a high-quality weave with 60 fine threads per square inch (60 TPI), that makes the tire light, comfortable and puncture resistant.
The air compartment of the tire works as a natural suspension. The smooth tread suits tarmac, cobblestones and hard surfaces. The Primera has a T-Guard puncture protection belt, "Skin Walls" and reflective logos for increased safety.
Trionic X-Country Tire
All Veloped models are now equipped with the brand new Trionic X-Country tire. The distinct and mountainbike-like tread of the X-Country suits off-road use, trails, gravel, snow and also tarmac and cobblestones.
Thanks to its flexible carcass made from 60 TPI weave, the X-Country offers a very good suspension, light weight and good strength. Just like the Primera, the X-Country tire has a T-Guard puncture protection belt, "Skin Walls" and reflective logos for increased safety.
Trionic Flex
A conventional 4-wheeled rollator always hits problems when you walk on uneven ground, as one of the four wheels sooner or later loses its contact with the surface.
Trionic has developed a new technical solution called "Flex", whereby four wave springs are integrated between the two Walker frame halves and the X-shaped folding cross. The new Trionic Flex feature gives the Walker 12er & 14er an extra bit of torsional flex, so that it remains standing on all 4 wheels.
100% Stainless Steel
As the Velopeds and Walkers are true outdoor products, since several years Trionic uses screws, nuts, washers, axle shafts and small parts made from stainless steel. For 2017 the Walker 12er/14er and all Velopeds also have wheel ball bearings and quick-release axles made from stainless steel.
Stefan Kindberg, Trionic's product developer, explains:
-"One single ball bearing made from stainless steel costs 10,00 € retail, and as the Veloped has a total of 13 ball bearings, the total cost is rather considerable. But as our Velopeds and Walkers are indeed true outdoor machines, we have decided to spare nothing in order to offer the highest-quality products available on the market."
2017' models of the Veloped
All 2017’ models of the Veloped offer You the following improvements:
• New frame made from hydroformed and butted 6061-T6 aluminium tubing.
• New Trionic X-Country lightweight tires with puncture protection, 60 TPI carcass, skin walls and reflective logos.
• New CST inner tubes that keep the tire pressure longer.
• A total of 13 ball bearings made from stainless steel.
• Push-button quick-release axles made from 100% stainless steel (3).
• New climbing wheel suspension made from high-grade 6061-T6 extruded aluminium parts.
2017' Walker 12er & 14er models
The 2017’ models of the Walker 12er & 14er offer You the following improvements:
• Lowered weight: Walker 12er -0,5 kg / Walker 14er -0,8 kg
• New Trionic Primera lightweight tires with puncture protection, 60 TPI carcass, skin walls and reflective logos.
• New CST inner tubes that keep the tire pressure longer.
• A total of 8 ball bearings made from stainless steel.
• New rear wheel push-button quick-release axles made from 100% stainless steel.
• New front wheel quick-release skewers that are easier to operate.
